Pipeline All-position Automatic Welding Machine (Magnetic Suction Type)

Pipeline All-position Automatic Welding Machine (Magnetic Suction Type)

hw-zd-200

Product model: HW-ZD-201

Applicable pipe diameter: ≥DN1168

Performance characteristics:

1. The all-position automatic welding machine is suitable for long-distance pipelines or fixed welding seam filling and cap welding at installation sites;

2. The all-position automatic welding machine does not need a track when welding carbon steel pipes, and the magnetic wheel is adsorbed on the pipe and crawls automatically;

3. The all-position automatic welding machine can steplessly adjust the rotating speed of the head; the welding torch can swing linearly along the axis of the pipe;

4. The welding torch of the all-position automatic welding machine can be adjusted in angle along the axis of the pipe; the welding torch can be adjusted in angle perpendicular to the axis of the pipe;

5. The welding torch of the all-position automatic welding machine can be adjusted up and down along the radial direction of the pipe; standard KEMPPI welding power supply;

6. The all-position automatic welding machine can weld solid-cored wire/flux-cored wire+mixed gas/CO2 upward welding.

7. The all-position automatic welding machine can crawl magnetically, without track, wireless remote control, real-time adjustment of parameters

8. Flux cored wire welding upwards

9. Suitable for on-site welding

The all-position automatic pipe welding robot system independently developed and designed by the company can replace the welding action of manual arc welding and automatically complete the welding action. The inner shape of the welding seam is uniform and the surface is beautiful, which can solve the problems of low manual welding yield and slow welding operation speed.

Precautions:

1. Clean up the workplace at least once a day to avoid messy accumulation and affect the normal operation of the equipment;

2. Check whether the electrical box, control box, control box, junction box, etc. are wet at least once a day;

3. Check the integrity of the grounding wire and the normal operation of the limit switch at least once a week to ensure the safety of equipment production;

4. Wipe the outer surface of the equipment at least once a week to ensure that the appearance of the equipment is clean and tidy;

5. Check the wires and cables at least once a week to ensure that the wireless head is off, the contact is worn, the cable is damaged, and the components are damaged;


Post time: Jul-23-2021